Description
Motor driver module is a very important module to run motors in many applications. This is because we cannot directly run motors through the controllers or FPGA module as motors can draw high to very high current. So, in order to protect the controllers or FPGA boards, we need a motor controller driver module. L293D IC is very suitable for controlling the motors as it is having H-bridge mechanism to run the module in any direction.
This module has three screw connectors, one for connecting the VCC2 to run the motors, one for connecting a motor, and other one is for connecting another motor. The motors are inductive load and this is why this board is having four capacitors to protect the IC from back EMF. There is a jumper which is normally not connected. If this jumper is connected, then VCC1 and VCC2 get shorted. This facility is given on the board in order to help the user connect single supply to the board. If user wants to connect separate VCC2 and VCC1 then this jumper is open.
Quantity-wise price list:
Quantity | price |
above>10 | 75 |
Note:Â Prices mentioned in the above list are without GST and only applicable for manual orders by phone or WhatsApp.
Souvik panda –
The product is very good to use for a motor.
Indrajit chail –
Nice product.